25 March 2018

Spring Reveal: Getting Argon Ready For Another Season


Argon will be splashed in just a few weeks.  We have a pretty long spreadsheet of things to get done before (or shortly after) that happens.  We're way overdue for a blog so here's a bit about the projects.
 


Bob Damiano

Stern Light

Argon's stern light is mounted on the stern rail. Sounds logical so far, but then we went and added davits for the dinghy. The problem is that when the dinghy is hoisted, it just about perfectly blocks the stern light. Our rear end is definitely not visible for 2 nautical miles like this.

Stern light needed to be re-positioned from the stern rail up to the transom radar mast so that it is clearly visible when we have the dinghy hanging off the davits.

The logical place to put the stern light up higher would be on the transom radar mast. This mast is a standard Edson 3.5" round aluminum mast. The new light - an Aqua-Signal series 34 LED (of course) has a flat mounting base.

I figured there would be dozens off the shelf thingies - either from Edson, or others - that would provide an easy way to mount this light. I couldn't possibly be the first person who wants to mount a flat thing to an Edson mast, could I?  Well, apparently I am.  After kicking around a few ideas with my brother and others, I happened to be in the hardware store one day and noticed that 3" PVC pipe has exactly 3.5" outside diameter.  I decided to try molding my own thingie out of epoxy.  The pipe made the nice radius and some duct-tape covered cardboard formed the edges of the mold.  Then, I just filled it with six-10 and waited a day.

It's not the most beautiful thing, but it worked. See photos to follow

Building the mold

Mold filled with six-10

First prototype extracted from the mold

Final version drilled for the light and ready to paint
Painted

Back on the boat drilling wiring hole and drill/tapping mounting screw hole


Wiring done, bracket mounted
And the light mounted to the bracket
The new wire was easy to snake down to the bottom of the mast.  I've ordered some Deutch Connectors for the disconnect at the bottom of the mast.


Ground Tackle

Argon's main ground tackle consisted of 100 feet of 3/8" chain plus 100 feet of line.  The Anchor is a 35lb Lewmar Delta.

This setup has served us well in most conditions.  There was one particular situation during our Caribbean Cruise in 2016 where we wished we had a little more going on down there.  It was about 40 hours straight of 30+ kt winds while anchored in 30 feet of water in Deshaies, Guadeloupe. Our chain alone had us at about a 3.5:1 scope.  We put out some line and also extended our snubber as far as we could but we were still very under-scoped for the conditions.  We dragged nearly 30 feet over the 40 sleepless hours.

We became particularly intimate with our ground tackle while cruising the Caribbean regularly diving in to check the set and confirm there was no debris. And we also decided that even more chain was needed.


So, we purchased a new 160 foot length of 3/8" chain.  I think Defender actually gave us more like 165 but who's counting?  I spliced our existing rode to the new chain, put some marks every 40 feet and installed it. This extra 60 feet of heavy chain would have sure come in handy in Guadeloupe.  It will certainly make me dislike anchoring a little less in general.

Measuring and marking the new chain

Ready to "weigh anchor" and slurp it all into the boat for the first time.

Chain Splice by Bob.



Sanitation System

The head worked. If it ain't broke, why fix it?

Marine sanitation systems are built for weekenders.  We lived on the boat full time for nearly three years, so this system had about ten years of normal use on it. I figured it would be much easier to tackle this stuff preemptively while on the hard than it would be during the season while sailing around.

What we did:

  • Replaced all (well most) sanitation hosing including the vented loop
  • Replaced all internal components of the toilet itself
  • Replaced the deck filler cap

What we learned:

Warning: I'm going to say a bit of bad stuff about the Tartan-4000 here.
I have always loved how easy Tartan made it to work on the various systems on Argon.  I am able to get access to and work on just about anything, anywhere on the boat. The sanitation system is the exception. I have to say, I'm really unhappy with the access to this stuff - especially considering that there is some below-the-waterline stuff in there. Access to the Y-Valve, Thru-hull and Macerator Pump are through a tiny door that opens under the sink which is not nearly wide enough to get both hands inside. At one point I stuck my head in there and was not quite sure it was going to come back out. I found myself fishing around in my pocked for my phone in case I needed to make the most embarrassing 911 call ever.  It is extremely difficult to work on this stuff and given how unpleasant the sanitation system already is to work on, this was a particularly miserable project.  I am very tempted to hire someone to completely re-do the pretty round casting under the sink to have a nice big fat access panel. There's just too much important stuff behind there to have such horrible access to. Either that, or maybe I'll get me some trained rodents to work on it next time.


The main access to the vented loop and deck fitting is gained by removing the shelf cabinet in the shower.  That's easy enough to do and actually gives pretty decent access.

Unknown to us all this time was that the vented loop had at some point failed.  The "duck bill" was stuck open so that what was inside the pipe could get outside the pipe when flushing. This explained the occasional bouquet inside the boat which we always assumed was because of permeation of the hoses. No - it was just squirting sewage on the side of the hull and a wiring conduit - that's all.  If nothing else, seeing and fixing this made it worth opening up the shower to get this replaced.

Strange Deck Fitting

The deck fitting for waste pumpout has always been a bit frustrating on Argon.  We first ran into a problem when we lived aboard over the winter at Constitution Marina and tried to get a pumpout "snorkel" made. We could not find anything that would fit the thread properly. Nothing english or metric would fit quite right.  The next indication that this was a strange fitting came when I accidentally swept our filler cap overboard while sweeping snow off the deck one day. Finding a replacement eventually led to emailing Tartan to ask where they got the fittings.  Turns out, they are sourced from a company in Florida that I had never heard of.

The problem really came to a head (ha!) in Turk$ and Caico$.  The marina we were at would only do screw-in fittings for pump-outs. They had nothing in stock that would fit our deck fitting.  Eventually, they took an old fitting and cross-threaded and mangled it enough to get it to suck (then charged us $30 for the pump-out).

As long as I was in there, I wanted to replace that deck fitting with a normal one with a regular ol' thread.  The new one is a White Cap brand.

Shower cabinet removed. Stains on the hull were from the spewing vented loop. Yuk.

Toilet is out (and home)



The old vented loop and hose


Linda working on replacing everything in the toilet at home. PDF manuals on the laptop.


Linda, our head technician.

The replacement parts for the toilet were challenging to source. No kits available and had to search for individual pieces across three different companies. Ended up costing well over $200 for several basic parts. All in all, we spent nearly what a new toilet would cost replacing all the guts of the toilet. Tartan: this would make a nice spares kit!

Removing the old oddly sized deck fitting.


The new White Cap deck fitting installed - easy job.


Rebuilt toilet ready to install. Brand new sanitation hoses already run.
Another improvement to the system can be seen in the above photo.  Tartan had simply butt-spliced the four wires to the toilet.  The new motor for the toilet came with a Deutch Four-Pin connector.  After some searching and several re-orders, I finally got the mate to this connector from a race car supply company called Batts Racing.  The connectors are very well made and waterproof.

The toilet is in (and it runs). Note the tiny access door under the sink.


New vented loop and hose can be seen behind the shower
Generally, when we touch anything on the boat, we try to make it better than it was. On this project, we also replaced all of the low-end hose clamps with expensive non-perf stainless steel ones. We've been doing that all over the boat in other projects as well. The cheap ones are about $0.79/ea and the good ones are several bucks a piece.

 

Speaking of Vented Loops

I have no photos of this one, but the discharge hose for the sump pump had a loop, but not a vented loop. Argon has always had a slow re-filling of the sump due to siphoning action from the discharge. This became semi-alarming (actually literally alarming) during the six day passage from Bermuda to Antigua as the sump was filling quite often.  Per Tim Jackett's recommendation I also put a vented loop in this discharge line. That problem should be solved.

 

Headstay Adjustment

We've known for some time that Argon's head-stay could use a little more tension.  We find ourselves hardening up the backstay to compensate even in pretty light air. A couple of different rigging folks have suggested that a turn or two might be good but that it was "pretty close" as it was. Before putting the sails on, I wanted to get to this chore. With the furling head-sail systems, it requires detaching and raising the drum to reveal the turnbuckle.

It's been a while but I finally remembered how to do that. We ended up putting 1-1/2 turns on the turnbuckle.  I measured the head-to-head spacing of the turnbuckle rods and we shortened the headstay by about 4mm.

Measuring the turnbuckle spacing with digital calipers

Uncovered

The best part is that Argon is finally uncovered. The heavy winter canvas cover and metal framework are taken down. Now, we're just hoping for a good hard rain to clean things up. This time, when we took the cover off, we added some labeling to make putting it back on a little easier.



Taking the cover off.
Cover off revealing the frame.

Rolling up and labeling the cover.

Getting ready to fold the bigger rear half of the cover.

Soon Argon's bottom will be painted and then back in to the water where she belongs!


There are other projects in the works as well.  We're replacing the gooseneck bolts with shiny new ones that we ordered from Tartan (another proactive replacement).  We're also adding some control lines for the reacher sheets. And of course there is plenty of routine maintenance such as painting the bottom, replacing all the zincs, waxing the hull & deck, cleaning & treating the cockpit teak, and all the diesel engine maintenance. Oh, and there will be sailing too!


07 July 2017

Our Caribbean Cruise in Stats, Graphs and Tables: Finances, Fuel, Feuds and Fishing

Ten months, 5000nm, 18 countries, 80 harbors. One broken collar bone, clogged head and seized up water pump. Hundreds of cruising friends met. Below are some more data and figures of our extended cruise.

Captain Linda Perry Riera

 

Back in Boston

As I write this post, we are overlooking the Boston skyline from a favorite anchoring spot, Peddocks Island, part of Boston Harbor Island National Park. We will sail the short hop to Constitution Marina tomorrow which was our departure point ten glorious months ago. This trip as been an unbelievable adventure in so many ways. Below are some of the analytic aspects of our voyage.

Argon's grand loop:  5000nm (5754 statute miles), 15 countries, approximately 80 harbors.

Boston skyline from the anchorage at Peddocks Island last night. A fitting time to reflect as we return to our starting point.

Many Wonder, Few Ask:  How much does a trip like this cost?


There is a range of how to approach an extended cruise from a lifestyle and thus financial perspective and scant specific information out there. During our planning phase I would read Beth Leonard's The Voyagers Handbook in the evenings (while sprawling on my king sized bed... oooohh, to sleep on a big bed again; I digress). Beth's book is a wonderful resource for learning about passage planning, watch keeping, anchoring, sail handling, living aboard, etc. A particularly interesting section is devoted to finances and is highly recommended for anyone considering an extended cruise. Below is an estimation of our monthly and total spend.



Disclaimer: We started off with an extremely ready, sea worthy vessels (and lots of up front investment in to it). Many cruisers we met along the way had older vessels and needed to spend more time and money fixing things along the way. 


Several prior blog posts outline some of our preparations prior to last September:



Our monthly burn rate was a bit higher than we initially forecasted mainly driven by:
  • Data / connectivity.  See blog post Data While Cruising  Note: Our (aka Bob's) need for data due to his job is definitely way more than that of the average cruiser. And we have accumulated half a terabyte of photos and videos to upload.
  • Eating out.  One can certainly spend less by cooking aboard vs eating out as much as we did. But we enjoy experiencing the islands by visiting lots of different restaurants and eateries. 
  • Trips. The visits with the boys were fantastic and I am very grateful for the special time with them in gorgeous locations. In hindsight, we would have chosen less expensive locales. Two of the three countries we selected for visits were extremely expensive: Bermuda and Turks & Caicos.
  • Docking more than planned (vs. anchoring which is free).  Dock fees would vary widely from $40 to $160 per night. (The lower priced docks were only basic tie ups with no electricity or water.) Sometimes we docked to be more secure in high winds, or to be able to get shore power to run the air conditioner a bit (to dry out the boat even more so than to cool it), and to give Argon an occasional good exterior washing. We extended dock time in St. Maarten to give Bob's collar bone some time to heal and in TCI due to bad weather and waiting for boat parts.

Some added notes about spending

Boat insurance - Many cruisers deem this optional or too expensive and opt out. Some marinas require insurance for dockage. I suspect shipyards will also require if a haul out is needed. Our insurance premium was quite high due to our scant off shore experience prior to the trip and the associated dangers with the long off shore passages (and shorthanded crew). In the future, our premiums should be less as our experience is now much more robust.
Medical insurance - Many cruisers are a bit older than we are and seem to have medical insurance either through their retirement package and/or Medicare (if US) or national insurance, of course, if from outside the US. We both purchased private, basic policies through the healthcare exchange last year and planned to mostly pay out of pocket for minor needs.

Income


  • Bob continued working remotely throughout the trip, more than planned at about 20-30 hours per week which was good to help address the ad hoc hits and lessen the savings drain.
  • I had put aside $40K from my savings prior to the trip. This is gone; time for me to get back to work I guess. (I left my job July 2016.)
  • YouTube sailing channel and ad revenue from blog:  Well, we are not popular enough to make more than a couple of dollars a month here... yet. 
Bob continued his software engineering on the high seas and anchored in harbors. The work sometimes took him away from land exploration but provided nice income to off set expenses. I immensely enjoyed the freedom from paid work for a while (although the paycheck is missed).

 

Cost of Cruising vs. Cost of Living on Land

This is a discussion Bob and I have had several times when we estimate the cost of this trip. The above representation does not compare the expenses of living on land in a house and weekend boating expenses to the cost of living aboard and setting off on an extended cruise. Many of the expenses above would have been incurred even if we had not been cruising (groceries, eating out, boat parts, cell phones as well as many of the boat related expenses). In addition, we have not been spending money for a year or more on the following:
  • personal cars and associated insurance, maintenance, gas, repairs
  • home mortgage, taxes, insurance, maintenance and repairs
  • accumulating stuff to fill and replenish home
  • summer dock slip, winter haul out and storage
I guess one might be able to rationalize that we saved money on this trip. :-)

Although $68K sounds like a lot, this was our total expenditure for 10 months of living. Intense living filled with unique adventure, travel, challenge and beauty. It was worth every penny.

Fuel

There are a few reasons why most long distance cruisers are in sailboats, not power boats:  (1) sea steadiness / handling in big waters, (2) cost of fuel, and (3) travel distance with available fuel. We strive to sail as much as possible but firing up the diesel is necessary when winds have died as well as for motoring in to and out of harbors. In addition, the alternator on the diesel engine will charge our batteries when the solar panels can not keep up such as when we were in higher latitudes (last fall) and when there were extended periods of overcast. We consumed 270 gallons of diesel overall.

We track the diesel consumption rate to ensure we know our range on a tank of fuel:

The fuel consumption rate is generally about 0.8-0.9 gal/hour when we are motoring in to and out of harbors and in transit due to low wind. The rate was lower around November when we were in Bermuda and having to run the engine a bit just to charge the batteries as the low, late season sun was not quite sufficient for our solar panels.

At 0.8 gal/hour we can run the diesel for 96 hours. Depending on conditions, this would yield a range of about 675nm. This is important to know for the extended off shore trips should the need arise to motor substantially.

Our most efficient trip may have been from Hampton, VA to Bermuda 650nm (748miles) using only about 0.6 gallons diesel which translates to 2,247 miles/gal (I'm feeling very green). However, total gallons consumed these past ten months were 270 which for a 5000nm (5753mile) trip translates to 21 miles/gallon. Diesel price ranged from a high of $7.91/gal in Antigua to lows around $2.60 in North Carolina. Our total spend was about $850 on diesel and about $50 on gasoline for the dinghy. Other than renting a car a few times, we had no automobile expenses this past year.


Feuds and Fights


Bob = introvert, Mr Fix It, keen attention to detail and safety, anxiety prone
Linda = extrovert, big picture, optimistic, not anxious enough
Both = love sailing, Argon, and each other

As friends have commented, Bob and I most definitely find our chi best when sailing. However, there have been a few times during this trip when we butted heads and both wanted nothing more than to get away from each other. Two of these times we were kind of stuck on the boat and I was unable to easily stomp off and away. Argon feels very tiny at times.

We still like each other.

Fishing


Our early fishing success was attributed to Smitty, our third crew person for the six day Bermuda to Antigua passage. This would be followed by a couple of months of being skunked before starting to get hits and bring in fish starting around the waters of Puerto Rico, Turks and Caicos and throughout the Bahamas. The graph below represents mahi, wahoo and barracuda that we landed on the boat (but did not necessarily keep and clean). There were several additional mahi that we came close to landing but lost. It is customary not to eat barracuda in particular as they can be infected with ciguatera so we carefully plied out the lure and threw these mean guys back.

Fishing success kicked in around February.


Mahi mahi caught in Bahamian waters.
We stretched fresh mahi for several days across many meals. Yum!
We switched to using a hand reel instead of a traditional poles in the Bahamas.

Another Project Management Spreadsheet

We lived by a multi tab spreadsheet the 18 or so months prior to our trip to help us organize the many things to do, to buy and to learn. Now we have started a new log of projects to tackle this winter complete with cost estimates, due dates, and completion statuses. Below are a few items on the list.
  • Upgrades: Reacher fairlead car adjusters, rope clutch replacement (started recently in Mystic), add solar panel (Solbian 50W) and controller - this will increase our (theoretical) power generation from 335 to 385, solar panel controller upgrade, DC to DC converter, aft cabin shelves, nav station instrument, top down furler for spinnaker (not sure), ground tackle (increase from 100 to 150 feet of chain), compass light re-wiring to separate breaker, etc.
  • Maintenance and replacements: Sails (main, jib, genoa) washed, inspected and repaired; Canvas cleaned and treated, new sail cover, brightwork (teak cap rails, cockpit table, dorade box covers, etc), interior floor varnishing, dinghy outboard servicing, dinghy cleaning and proactive patching, kitchen faucet (done), head hoses (yuk), move stern light, goose neck inspection and new bolts, etc. 
But wait, it's still only early July! We have the rest of the summer to spend enjoying the cold (but warming) New England waters. So not to much attention to this spreadsheet just yet!

Argon returning to Mass Bay via the familiar Cape Cod Canal.








21 May 2017

Passage to America: Debriefing our Longest Double-Handed Passage

Neither Linda or I love the offshore passages. We both get more than a little nervous and anxious as the time of one is approaching. That said, we've both got more than 2400 Nautical Miles offshore on Argon (and I actually have one more Bermuda passage on another boat on top of that).

Bob Damiano

This post is about preparing for and sailing our longest offshore double-handed passage from Grand Bahama to Beaufort, North Carolina. The distance is about 550 nautical miles and we did it in about 70 hours. A video about the experience is at the bottom of this post, or you can just jump to it here (but please read the blog too so you can say "I liked the book more than the movie").

I used to think that sailing offshore is sort of like looking both ways to cross a street, covering your eyes, counting to thirty and then running across as fast as you can. Now that I've done it a few times, I think it's more like counting to fifteen. It's still a really dumb idea.

Building Up To This Passage


We did our first practice offshore passage in 2016 crossing from Boston to Nova Scotia. This passage allowed us to go through all the steps and processes (on a relatively short 52 hour/300nm trip) including hiring a professional weather router, lashing the dingy to the foredeck, communicating using our satellite data system, preparing meals in advance and generally getting Argon into offshore mode. This was also the shakedown cruise for all the upgrades we had done to make Argon an offshore-capable boat.

Bundled up (in July) off of Nova Scotia with a nice wave behind us.


We did most things right.  But we learned a lot and made it safely. We broke some stuff and fixed things so they were better than they came from the factory.  It was the first time we used Ken McKinley from Locus Weather, and we've used him ever since.

Once the one-year journey started, we did the first two long offshore passages with a third crew member.  We had our friend and experienced sailor/racer Lance Ryley along for the Hampton-Bermuda leg and local Bermudian Andrew "Smitty" Smith along for Bermuda to Antigua.

All passages since then have been double-handed.

A quick crew selfie of the three of us on the way to Bermuda


Posing for the camera just an hour before taking off from Bermuda for 850 nautical miles. Our third crew, Smitty in the middle.
That whole thing about "Teach a man to fish..."  Well, Capt. Smitty taught us to fish during the Bermuda to Antigua passage. Wahoo for dinner!. We believed it was the bright yellow spinnaker that attracted him.

Having additional crew vs double-handing


There are definitely advantages to having additional crew for a long passage. For one thing, it's much easier to get insurance if you have more crew for offshore. The real benefit of course is the extra set of hands and experience (we've learned so much from our crews each time) and the theoretical additional rest time. I say "theoretical" since we all were having so much fun, there were many times when all three of us would be awake and yapping away in the cockpit. Linda and I definitely had much more peace of mind when we had that third experienced person along with us.

The big plus about going double-handed is flexibility. If Ken McKinley says You can go Monday, but Wednesday is better, we will just go Wednesday. There are no flights to change or cancel and no one is running up against a time constraint or work conflicts. In other words, there is zero incentive to go at any other time but the best time based on conditions.

Until this passage, the longest double-handed offshore passage we had done was San Juan, PR to Grand Turk. This was 365 nautical miles and about 55 hours. It was a moderately tough passage - especially the last 35 miles and we were both surprised at how exhausted we were towards the end.

Putting the dinghy on the foredeck in San Juan for the passage to Grand Turc 365 nautical miles to the northwest.
Day 2 sailing from San Juan to Turks and Caicos.
 

Autopilot

Another factor in our deciding to go double-handed is that Argon finally has a high performance Autopilot. We noticed during the earlier offshore passages that Argon's A/P just simply was not cutting it in big seas. As a result, these passages were 90% hand-steered!  We didn't mind hand-steering that much, but if anything went wrong, it was impossible for whoever was at the helm to let go and help.

While in Turks and Caicos, I decided to try doing a software update for the Autopilot. What I found was that every device aboard Argon was way behind in software updates. On modern Raymarine equipment you just download the update file, put it on an SD card and pop it in your chartplotter. The installer does everything automatically including discovering and installing new firmware into every device it finds. Besides the autopilot, we actually got some fancy new features in our chartplotter and i70 displays.


And just like that, we have a new autopilot!


On our passage from Turks to Long Island, Bahamas, although the conditions were not extremely severe, we noticed right away that the autopilot was doing better - much better!  In subsequent passages in all types of conditions, it has proven itself to be ready to really handle the boat in just about anything. You would think a tech geek like me would have done this before we left on the journey, right? Now, I can say that the autopilot steers just about as well as we do. The upside is that we got many, many hours of practice hand steering in some pretty big water.

 

 

Planning The Passage To America

Most sailors who return from the Bahamas, jump straight across to Florida. If we wanted, we could have gone due west and landed in Palm Beach in about 7 to 9 hours. We didn't want to do that for a few reasons:
  • From there, it's a long way up the east coast. 
  • We would miss out on that nice gulf stream boost
  • We are too tall and too deep for the ICW (and I wouldn't want to do all that motoring even if we did fit), so instead of looking for one weather window, we'd be looking for many as we hopped up the east coast "outside"
It's actually just a day sail back to the US if you want. But then you have to worry about the next 1000 miles

We considered several options for an entry port including (in order of distance) Charleston, SC, Cape Fear, NC, Beaufort, NC, Hampton, VA or even all the way to New York City.  Ultimately we chose the 550 nautical mile route from Grand Bahama to Beaufort, NC. Having some friends and family there made the decision even easier. This would get us a long way up the east coast and it should be a pretty fast ride as more than half of it would be riding the stream.

A note about the photos.  Our awesome Panasonic FZ200 after years of abuse on a sailboat has finally bit the dust.  All of the offshore photos and videos have been taken with the GoPro.  Once in Beaufort and with access to Amazon (ain't America great?), we upgraded to an FZ300.

 

Preparing

We started looking for a weather window while we were still in Port Lucaya, Grand Bahama (near Freeport). We wanted to jump off from West End, Grand Bahama about 36 miles to the north-west.  When Ken came back with a window starting just three days later, we got ourselves up to West End as quickly as we could and then had just one day to do all offshore preparations.

Without a lot of time, we dove into the usual offshore prep routine.
  • Mount the dinghy outboard to the stern rail and secure it
  • Hoist the dingy to the foredeck and lash it down securely
  • Lash down dinghy gas tank and extra diesel jug
  • Fill diesel and water tanks
  • Stow everything securely below
  • Prepare the passage bunk
  • Test the Satellite system
  • Review weather data
  • Provision and cook several healthy, easy on the stomach meals
  • Install the jackline in the cockpit so we can always be tethered in (deck jacklines are always rigged)
  • Inspect, inspect and inspect some more
  • Get some rest
After that was all done, we had a lovely dinner at the marina and tried to have a relaxing night. Departure was to be noon the next day with a planned arrival mid day in Beaufort, NC about 70 hours later.

Our first and last night in West End, Grand Bahama. Giant Fishing Tournament starting the next day.

Celebratory final toast to our fantastic Caribbean winter and our last night in the islands.


A few hours before leaving with Argon fully prepped, Linda poses for a girl-power shot.

Final WX  Forecast from Ken at Locus Weather

With conditions generally favorable for riding the Gulf Stream, and an eddy southeast of Cape Fear producing adverse current for an approach to the southwestern North Carolina coast, the following waypoints are suggested:

West End
26.8N/79.5W
30.0N/79.5W
32.2N/78.4W
33.5N/76.8W
Beaufort

Boat speed estimates have been increased to 9 knots for the run north to the east of Florida with gulf stream current speeds of nearly 2 knots in that area, then 8 knots has been used  from there northeastward along the route where the current speeds are not as consistently strong. With a desire to arrive near midday at Beaufort, a departure time from West End in the early afternoon tomorrow should accomplish this.

The forecast is presented for departure from West End early tomorrow afternoon, and assumes a route defined by the waypoints above.
Time: Thursday early afternoon 4/27/2017 (1400 EDT, 1800 GMT)
Expected approximate position: departing West End, Bahamas
Forecast Winds: SSE 11-15 kts
Forecast Sea State: 1-3 ft.
Comments: Fair weather. Winds a bit stronger and seas a bit higher once into the Gulf Stream, but not unusually short or steep.

Time: Thursday evening 4/27/2017 (2000 EDT, 0000 GMT Friday)
Expected approximate position: 27.0N/79.5W
Forecast Winds: SSE 13-17 kts. 
Forecast Sea State: 2-4 ft.
Comments: Partly cloudy.  Seas a bit higher farther north through the night. Winds veering to S overnight.

Time: Friday morning 4/28/2017 (0800 EDT, 1200 GMT)
Expected approximate position: 28.7N/79.5W
Forecast Winds: S 13-17 kts
Forecast Sea State: 3-5 ft.
Comments: Partly cloudy, an isolated shower or two possible.

Time: Friday evening 4/28/2017 (2000 EDT, 0000 GMT Saturday)
Expected approximate position:30.4N/79.3W
Forecast Winds: S 13-17 kts.
Forecast Sea State: 3-5 ft
Comments: Partly cloudy, a brief passing shower possible.

Time: Saturday morning 4/29/2017 (0800 EDT, 1200 GMT)
Expected approximate position: 31.8N/78.6W
Forecast Winds: S 14-18 kts
Forecast Sea State: 3-5 ft.
Comments: Fair weather.

Time: Saturday evening 4/29/2017 (2000 EDT, 0000 GMT Sunday)
Expected approximate position: 32.9N/77.4W
Forecast Winds: S 13-17 kts. 
Forecast Sea State: 3-5 ft.
Comments: Fair weather. Winds veering to SSW overnight

Time: Sunday morning 4/30/2017 (0800 EDT, 1200 GMT)
Expected approximate position: 34.3N/76.7W
Forecast Winds: SSW 13-17 kts
Forecast Sea State: 3-5 ft.
Comments: Partly cloudy. Winds backing to S late in the day

Time: Sunday evening 4/30/2017 (2000 EDT, 0000 GMT Monday)
Expected approximate position:arrived Beaufort, NC
Forecast Winds: S 13-17 kts.
Forecast Sea State: 3-5 ft
Comments: Partly cloudy. Winds increasing and seas building overnight.

The Route

Basically, the plan was to head pretty much west from West End, Grand Bahama as far as 79:30.0W and then turn due north riding the stream. From there, we had a few way points to follow to maximize the stream and head toward Beaufort.

The general waypoints for our route.

The Passage

The conditions for the passage were overall quite moderate. We actually had port lights open for ventilation at times - a big no-no generally, but it was very hot and extremely settled at the time.  The overnights were actually when conditions got the most robust. The first two overnights had winds into the high teens and low twenties with Argon screaming along in the stream at over 10 knots!  Seas got up into the 1.5 to 2 meter range overnight but then seemed to settle down during the days.


There was not too much traffic to contend with either. Linda did radio a Japanese tanker on one of her overnight watches as the AIS indicated we would pass less than a mile apart. The tanker confirmed Argon was to hold course and the tanker altered her heading slightly to pass safely.

A shot of me at the helm from the passage bunk. Why isn't she sleeping during her off time? (notice the open port lights offshore)

Beautiful sunrises and sunsets every day. We were very conscious that these were our final miles before being back in the US.

Reading, not sleeping.
Sailing downwind at 8kts on flat seas in the gulf stream. Why would anyone do the ICW?

Linda takes a selfie on one of her night watches.

Arm shot selfie on our last sunset offshore.

Sunrise approaching Beaufort!

Fish On!

Conditions were so benign the first day, that we decided to put out a fishing line. I recently had put together a hand line setup with a "yoyo" and this is what we used. Before long, it caught some sea grass. I reeled it in, cleaned and put it back out. Before I even took the line off the yoyo, it got hit hard! The hand line setup has a bungee cord that leaves a loop in the heavy line. Once that loop pulls tight, it sets the hook automatically. From then on, there is no elasticity in the system. You reel the dyneema and heavy fishing line up on the yoyo.  We managed to keep this nice Mahi Mahi on and get it into the cockpit where we gave it the Guadeloupe Rum in the Gills Treatment (this rum is too disgusting to drink and is only used for killing fish or cleaning engine parts).

First catch with the Hand Line and probably our last fish for a long, long time. The yoyo is on the floor behind me.


Zig-Zags

It's all well and good to say "go due north until point x,y", but when the wind is directly behind the boat as it was, it was very difficult to maintain this direction. The winds were mostly in the low to mid teens for much of the passage and when you factor in that the stream is pushing us at 2kts, it's hard to keep the sails full. We ended up gybing back and forth in the stream and here is where we made a bit of a tactical error. We centered the gybes on 79:30W which upon further analysis of the stream data was just on the eastern edge of the fastest current.  So each time we gybed east, we actually fell out of the stream and lost some speed. Once we figured out this was happening, we kept more west in the fastest part of the stream. The good news is that with 2kts of current behind you, a gybe that would normally change your direction 30 degrees changes it by more like 20 over ground. This made it possible to point the boat a little higher and get some speed while still going quite north-ish.  I'm sure our racing friends are saying "well... why didn't you fly the chute?".



A few of our zig-zags from our track. Go west, young man!


With the sea state so calm and wind direction so consistent, we were able to do quite a bit of wing on wing sailing

Reflection

On the last evening, it all started to sink in. After seven months in the Caribbean and Bahamas, we were about to see our very last sunset over the ocean. We were also seeing some of our last deep blue water which unless you've seen it, no description of the color and texture can do justice. Photos and videos never capture it. We've also seen the last of the wonderful people of the Caribbean and Bahamas. We've met so many people who have so much less than us and yet are more welcoming and friendly and open than anyone from the first world. It makes you realize that they have life figured out right. It took me months to stop wondering "what does he want?" when someone would be friendly to us. Do I have to re-learn that now?  Anyway, on to 'merca.

Taking a moment to think about how lucky we've been to do this and all the things we'll miss going forward.

Motoring

This was a surprise, but we ended up motoring much of the last twelve hours. This was a disappointment, of course, but on the other hand, I would rather have these conditions than the other end of the scale. Although there was some motoring, we had mostly very fast sailing on this passage. Argon was consistently doing 10 knots over ground the first and second nights!

A blurry shot of the i70s showing us doing only 9.7kts over ground.

On-Time Arrival

On the morning after our third overnight, Beaufort Inlet was just over the horizon. Soon, we saw Cape Lookout Light flashing every 15 seconds (just like the chart says it should). Navigating Beaufort Inlet is relatively easy and we were arriving just after low slack tide. We found our way to the Beaufort Town Docks which would be our home for the next seven days while we waited to proceed around Cape Hatteras to Hampton, VA. We were tied up by 10AM making the passage just 70 hours as planned.

We arrived on a Sunday and so the local Customs and Border Patrol office was not open. We kept our Quarantine flag up and didn't cause any international incidents. At 9AM Monday, we were visited by two officers who cleared us in quickly with no issues (except our eggs.  we had to cook our eggs).  Did we leave the boat before we cleared in? Next question, please.

Motoring the final leg in to Beaufort inlet.

Tied up in Beaufort. Time to get some sleep

The lovely boardwalk in Beaufort

Being Townies

Linda's relative Vic Fasolino and his wife Lora live in Beaufort these days after previously living in Rhode Island and New Jersey. They have managed to become local fixtures in the town (everyone we met knew them). Vic is a passionate wooden boat builder and has quite a nice shop set up in Beaufort. His boat building website is here.

Dinner at Vic and Lora's lovely and inviting home.

The house that Vic and Lora built (yes, they really did).


Vic Showing me one of his current in-progress boats,

I was very impressed with Vic's shop and tooling that he had set up.

One of Vic's Toys. This is a working fully autonomous wooden boat. There is a gps-driven auto pilot under the seat which Vic can program waypoints into. Vic and Lora will paddle to town for breakfast and have the skeleton boat follow them. Big hit with the locals and tourists!

This skeleton rides his trike in the local parades.

One of the street puppets Vic built for local parades.

I Work Too Much

While I slaved away at my day Job, Linda got to go sailing on one of Vic's sailboats (one that happens to be for sale by the way). The day they went out was a small craft advisory day with pretty brisk winds.

The lovely gaff rigged sloop that Linda and Vic sailed. This was built in Vic's shop.

So much wind that day, they tried sailing for a while with no main sail. Didn't work so well.


We picked a good week to be in Beaufort as the wooden boat show was happening. Other activities included the boat building challenge where teams are given identical materials and a design and have four hours to build a boat. That is followed by a race of course.

One of the events at the boat building museum we got invited to (or crashed).

One of the boats on display in the museum workshop.

One of the teams (the winner) in the Boat Building Challenge. These guys were way ahead of all the other competition.

Nearly Finished.

Another one of Vic's creations.  A viking boat.

Yes, of course it breathes fire.

Linda, Vic and Lora after a long day working the show.

Leaving Beaufort

There was quite a stretch of weather after we arrived in Beaufort.  We contacted Ken about a window to get around Cape Hatteras and there were not a lot of good choices. Eventually it came down to Leave Monday or you may be stuck for at least another ten days. So we left Monday. The window wasn't ideal but it was the best we were going to get for some time. We figured there would be some motoring involved but when rounding the notorious Cape Hatteras, it's better to err on the too calm side.

We decided to spend our last night anchored inside of Lookout Bight near the light. What a beautiful spot this is and it shaved about 15 miles off our passage up to Hampton, Virginia.

Argon anchored in the calm Bight with Cape Lookout Light behind us.

Beautiful dunes and scenery.

Could be a windows desktop picture, no?

This is a Bird Watchers paradise.

The Movie

Linda captured lots of footage of the preparation and the passage which have made it into another one of our videos.


We do really appreciate you following our blog and our videos and invite you to like, share, subscribe and all that other social media stuff.  If you would like to subscribe to our video channel, just click here!