22 May 2016

Sailboat Spring Chores: Aftermath

Bob Damiano

Previously, on Argon Voyages, we took Argon to Stanley's boat yard in Barrington, RI for some major work on her mast and other systems.  Along the way, we found some unexpected damage to the hoisting hardware on the mast.

Damage to both headsail sheaves due to luff length of sails being too long.

Tartan and Hall Spars came through

An email thread was started between Tim Jacket (COO and Chief Designer at Tartan), Ike Bowen (Service Manager at Hall Spars and Rigging), Bill Shaw Jr. (Argon's broker and Tartan NE rep and our good friend). A few determinations were made:
  1. The sails (OEM from Tartan mfg by Sobstad) were definitely cut with too long of a luff length. There was evidence of the shackles being jammed right into the sheaves.  We had already had to shorten Argon's Main's Foot length by 2" the first season.  And we had just finished having 4" taken off of the Jib luff length over winter 2015-2016.
  2. Tartan has since started adding Halyard Restrainers to the mast at a point 4" below the sheaves. This keeps the halyard nicely stable on the sheave pulley and centered while furling.  Tim Jacket said this was in response to complaints that the headsails on the 4000 were hard to furl in (we would concur with that).
  3. Hall agreed with the idea of adding the restrainers.  This of course meant shortening both headsails even more.  By the way, sail lofts don't shorten headsails for free.
The Hall Spars team ground off the already partially ground-off raised carbon edges around the sheaves and installed some pretty stainless chafe guards.  They also installed the Tartan-supplied halyard restrainers and a nice touch-up paint job.

Halyard Restrainer installed below empty sheave box

Finished Jib Sheave with chafe guard and halyard restrainer

Finished Reacher Sheave with chafe guard and halyard restrainer
After returning to Boston, I took some photos with the telephoto lens of the sheaves with the sails hoisted and furled.

Notice the restrainers holding the halyard tight against the sheave

Ike Bowen from Hall Spars personally came to Argon and measured the exact hoist length for the jib and reacher. This info was given to the North Sails (Portsmouth, RI) loft.  We ended up having an additional 180mm and 340mm removed from the Jib and Reacher respectively.

The Storm Sail Track

Here is the main reason we had the stick pulled.  Hall Spars added a track for a storm sail.  The Track is fully back-plated and installed very nicely.  How did they get a back plate 20 feet up into the mast?  Trained rodents is my theory.  Let's hope we never need the storm sail track.

The Track at the bottom. Notice it curves aft

The track ending just above the lower spreaders

The North Storm Sail hosted in light wind at the dock

Mast Tie-down

This is a Bermuda Race requirement for keel-stepped boats.  We're not doing the race, but we think it's a good idea anyway. Hall Spars installed this strong padeye in the Mast.  The stepping plate already had a nice 5/16-18 drilled and tapped hole at the base to add a stainless eye-bolt.  Some Dynema and a truckers hitch to tie it down, and that's done.  Let's hope we never need it.

Other stuff

When Ike from Hall Spars came to the boat to measure the hoist, he also noticed that we had a lot of play in our boom gooseneck.  He felt that there should be some nylon washers in there.  Fortunately, Ace Hardware actually has a very nice selection of these and we have a good assortment in our spares kit now. I manged to get these in on each side of the gooseneck bolt and it's much tighter (and quieter) now.

Plastic washers added to the gooseneck.
Bilge Pump
Stanley's Boat Yard took on the task of mounting and plumbing the new Edson Bilge pump.  The installation went smooth except for the fact that the first pump we tried actually had a pinhole in the bronze casting. Fortunately, Edson had another pump body in stock and with only costing an extra hour of yard labor, we were in business.

Nicely drilled holes for the pump

And the pump fully installed tucked up under the port side coaming
There is still one more part to this project that is in-progress.  The pump is heavy and I'm not comfortable having it mounted only on the surface of the coaming like this.  So some G-10 and threaded rod will be epoxied to the underside of the coaming and the back side of pump will be suspended by the rods.

The outboard side of the pump will be hung from those threaded rods. The G10 will be epoxied up under the coaming above the pump


Argon comes with lovely 3-piece teak hatchboard for the companionway.  They look pretty but they are a pain to deal with and take up a lot of storage space in the sail locker when not in use. I wanted to have a 2-piece acrylic hatchboard instead. I did a CAD drawing of what I wanted and we got that to Stanley's way back in January.  They in turn gave it to the subcontractor that they were going to use - Custom Plastic Solutions in Bristol, RI.

This project sort of went into a black hole and we never had any contact with the vendor while in Barrington.  With all the other stuff going on with the rig, this seemed to be low priority and we didn't know what to expect.  However on the last day before leaving Barrington, these beautiful hatchboards arrived wrapped in bubblewrap.  They came out better than we ever imagined.

View from inside the cabin; much more light but shaded privacy

And still more Canvas
Another project we've had in mind is getting a custom pouch made for our transom locker.  Phil Kinder at Kinder Industries suggested going with a strong mesh rather than canvas like most boats have.  This will let any moisture drain and keep it from becoming a mold farm.

Besides this pouch, Phil also made us some Lee Cloths for the settees.
Lee Cloth to keep Bob from breaking a rib when he gets thrown out of the bunk (you know how Linda drives)

And once up the Mast for Fun
Even though the mast was just restepped, we ended up having to send a volunteer (Linda) up the mast part way because the lazyjack lines came undone and fell out of their blocks.

She doesn't look too scared
These projects finished up the major remaining items as we prepare to venture off later this year.  Of course we still have a myriad of small projects and regular boat maintenance but it is good to have all of these items checked off (and paid for)!

24 April 2016

Preparing for an Extended Sailing Trip: The Three Year Plan

Captain Linda Perry Riera
The Three Year Plan = Bigger Sailboat + Smaller House + Take Off Sailing for a Year

The inception of The Three Year Plan came towards the end of a particularly tumultuous year and perhaps the difficulties experienced played in to the development of The Plan. Many sailors have embarked on travels much more extensive therefore this is not a particularly groundbreaking story but just the journey of one sailing couple.

We are late in life sailors with neither of us hoisting a sail, furling a jib, grabbing a mooring or cleaning a bilge until just 10 years ago when we were in our early/mid 40’s. But as soon as we took our first lessons at Boston Sailing Center we were both hooked. Our equal levels of naivete and enthusiasm proved to be a great formula for learning quickly as neither of us dominated but rather we leaned on each other and fumbled through challening situations together.

Learning the basics and then some on sweetly responsive open keelboat Solings

Racing in Boston Harbor

A little too much heeling on a C&C 30
We spent a few summers sailing very weathered club boats graduating from Solings to J24’s to C&C 30 class, and spent winters in navigation seminars and Caribbean coastal cruising classes including with Black Rock Sailing School.

ASA104 class with Black Rock Sailing School in the British Virgin Islands on a Hunter 52
Then we took the plunge and purchased a lovely Pearson 34, Fujin, sailing her hard and learning a tremendous amount about boat maintenance and repairs for four years as our passion for sailing grew.

Our first boat:  Fujin - Pearson 34 MKII

Tremendous learning about sailboat ownership, maintenance and handling with Fujin

Fujin on one of our many return trips in to Boston Harbor

Then the Three Year Plan was born: 
Step 1:  Bigger Sailboat... Added 6 Feet and a Zero 

We adored our Pearson 34. But as we considered the real possibility of serious, long term sailing and began talking about The Plan in earnest, we realized that we should move up in size.  And other major additions would be needed to allow true open ocean / blue water sailing in the future.

I had four criteria in mind as we tackled the very serious job of evaluating and deciding on what boat would replace Fujin:
  1. Strength - Overall quality and strength had to be high so that there would be no limitation on where we might go, including across an ocean. 
  2. Performance - We like to always try to sail well.
  3. Comfort - For extended cruising (and, unknown originally, to accommodate living aboard for more than a year before the trip).
  4. Pizzaz!  - Yes, she should be a head turner.
Tartan 4000
Although originally targeting and searching for gently used vessels, I quickly became fixated on the new Tartan 4000 at the Newport Boat Show fall of 2013.  After test sailing a few weeks later in Annapolis, crunching numbers, ruminating on future plans, and developing internal justification, the specs were finalized and production began in December 2013.  The price differential between Fujin and the new vessel would simply be an added zero. Cha-ching!!  A visit to the Tartan factory in Fairport, Ohio mid build in January further illuminated the precision and craftsmanship that goes in to this vessel.
Copious stringers and bulkhead mountings for extra hull strength
Vacuum infusion process for the fiberglass hull
No deck yet; all innards revealed
This eventually becomes the galley
Future living room
She's looking like a boat now
Dozens of stations at the factory work on components of hull #18

Argon is hull #18 of the Tartan 4000 line.  Our broker, Bill Shaw of New England Yacht Partners, was fantastic in hand-holding us all along the way including through some unanticipated complexities during the commissioning at Stanley's Boat Yard in Barrington, RI April 2014, only five months after finalizing specs.
Argon is commissioned at Stanley's Boat Yard in RI April 2014
We have completed two full sailing seasons on Argon logging more than 3000 nm via only northeast US coastal cruising and amidst busy career lives and can confirm that there are no regrets.  She is a fantastic sailboat.
Logging our first 1000nm off Provincetown Cape Cod several months after launching Argon.  We now have more than 3000nm after our fist two full seasons!!
 Smaller House: Subtracted a Zero

We sold our 3000+ square foot home spring 2014 but changed the equation a bit by not buying a smaller house, or any house at all, and instead moving on to Argon to immerse ourselves in to getting ready for the big trip.  This involved a dramatic downsize to about 300 square feet. Guess we took away a zero here so perhaps the bigger boat getting a zero and smaller house loosing a zero evens out??

Good bye lovely home on Knowles Farm Road
Downsized from 3000 sq ft to 300 sq ft
Bob retains a seriously truncated studio
The downsizing process was in full gear for 6 months prior to even putting the house on the market as each weekend was spent purging a closet or a room giving away, donating, selling, and throwing away. We now have one small storage unit nearby and realize that we could have done with saving even less stuff. Moving on to the boat enables us to not only adjust to living aboard in preparation for our trip, but also to focus on getting the boat ready for offshore and long voyages whilst still allowing us time for pleasure sailing amidst our very busy day jobs.

Take Off Sailing for a Year (or more): T Minus 5 Months

Preparing one's boat and life to truly throw off the lines and take off is a project management endeavor for sure.  Our multi-tab spreadsheet outlining "to do / boat projects", "to buy", "to learn", and "life logistics" has been instrumental in keeping us focused, organized and moving forward.

Multi tab spreadsheet forms the basis of our project management
We are following most of the extensive safety preparations dictated for the Newport Bermuda Race Safety Requirements which is a version of the US Sailing's Safety Equipment Requirements (USSER).  This includes taking a series of workshops one recent weekend in Newport as part of the Safety at Sea seminar by the US Sailing Association.  Most of what we practiced we hope to never need!!

PFD and life raft practice in the pool
Flares, smoke signals, fire fighting on the beach
Damage control in the USCG trailer
Drogue options
In July, we initiate a test launch of The Plan as we head off to Nova Scotia.  This will provide important practice for double-handing our first off-shore voyage together.  After returning to Boston in August for family events and final preparations, we will take off in September likely beginning with some coastal cruising before shooting across the Gulf Stream to Bermuda in October.  Then onward to the Caribbean windward islands after hurricane season.  That is as definite as our itinerary gets at this point.

The proximity of departure is getting palpable with me preparing to leave my fantastic position as of July 1st and Bob having arranged a 25% remote schedule with his employer starting in September. Our return plans are open-ended including where exactly we will return to.

Transforming Argon from Coastal Cruiser to Blue Water Vessel

Many of our friends have been puzzled as to why we always seem to be doing one boat project or another.  "Your boat is brand new... what else could it possibly need?"  We have spent this past year upgrading Argon from a lovely coastal sailboat to a true off shore prepared cruiser.

Some of the projects and boat parts added this past year include:
Now, as our spreadsheet gets more complete with fewer pending items and Boston weather warms, the proximity of our departure is tantalizingly near.

Unknown Variables:  Joshua, Christian and Jon

We have known since the initial discussions that one or more of our three young adult sons could have needs or situations that might impact The Plan. The boys will be 28, 23 and 21 years old when we depart and are on forward paths of their own. And they all seem to be realizing that their parents are serious about this crazy adventure and looking forward to connecting with us on exotic islands next winter.
Looking forward to meeting up with our boys, Jon, Josh, and Christian, at exotic islands next winter